Non-Oriented Electrical Steel Sheets
Our products, NON-ORIENTED ELECTRICAL STEEL SHEETS such as HIEXCORE, HIGH TENSILE STRENGTH HILITECORE, and various coatings, are highly regarded for their superb quality and abundant product line-up.
Features
- - HILITECORE™
- - HOMECORE™
- - HIEXCORE™
Excellent uniformity
Manufacture with state-of-the-art equipment and technology enables offering superb magnetic and other properties with only minimal deviations. This ensures a comfortable user experience.
Superior magnetization induction
Maintain high permeabilities over an extensive range, from low to high, of magnetic field.
High lamination factor
Cold-rolled allows for beautiful shapes and extremely smooth surfaces, and it also results in remarkably high lamination factors.
Superb insulation coating
The surface is coated with insulation film that are excellent in insulation, adhesion, heat resistance, corrosion resistance, oil resistance, and workability.
Great workability
These rigidly adhered insulation films allow these productsto offer good workability, such as easy punching and cutting. They also have high-dimensional accuracy, enabling high-speed and continuous punching operations.
Types and typical applications
HILITECORE™ H
This product exhibits almost uniform magnetic characteristics over the steel sheet in all the directions. It is used for iron cores of a wide variety of rotary machines, from large electric power generators to small precision motors. It is also good for small transformers.
HOMECORE™ H
Compared with HILITECORE, this product has more excellent magnetic flux density characteristics. It is best for small motors and small transformers.
HIEXCORE™ HX (HILITECORE for high-efficiency motors)
This product exhibits low loss (including high frequencies) and high magnetic flux densities. We offer a large product line-up specified for each of magnetic characteristic requirements including small and large various high-performance rotary machines.
HIGH TENSILE STRENGTH HILITECORE™ HXT
This product is good for mechanically robust products such as high-speed rotary machines. A sufficient tensile strength is also guaranteed. We offer a large product line-up specified for each of specific tensile strength and magnetic property requirements.
Specification
| Type | Assumed Density (kg/dm3) |
Iron Loss (W/kg) |
Induction (T) |
Lamination Factor (%) |
Number of Bends |
||
|---|---|---|---|---|---|---|---|
| Product | Grade | Thickness (mm) |
W15/50 | B50 | C | ||
| HILITECORE | 35H210 | 0.35 | 7.60 | ≦2.10 | ≧1.62 | ≧95.0 | ≧2 |
| 35H230 | 7.60 | ≦2.30 | ≧1.62 | ≧95.0 | ≧2 | ||
| 35H250 | 7.60 | ≦2.50 | ≧1.62 | ≧95.0 | ≧2 | ||
| 35H270 | 7.65 | ≦2.70 | ≧1.64 | ≧95.0 | ≧2 | ||
| 35H300 | 7.65 | ≦3.00 | ≧1.64 | ≧95.0 | ≧3 | ||
| 35H360 | 7.65 | ≦3.60 | ≧1.64 | ≧95.0 | ≧3 | ||
| 35H440 | 7.70 | ≦4.40 | ≧1.65 | ≧95.0 | ≧3 | ||
| 50H230 | 0.50 | 7.60 | ≦2.30 | ≧1.62 | ≧96.0 | ≧2 | |
| 50H250 | 7.60 | ≦2.50 | ≧1.62 | ≧96.0 | ≧2 | ||
| 50H270 | 7.60 | ≦2.70 | ≧1.62 | ≧96.0 | ≧2 | ||
| 50H290 | 7.60 | ≦2.90 | ≧1.62 | ≧96.0 | ≧2 | ||
| 50H310 | 7.65 | ≦3.10 | ≧1.62 | ≧96.0 | ≧3 | ||
| 50H350 | 7.65 | ≦3.50 | ≧1.65 | ≧96.0 | ≧5 | ||
| 50H400 | 7.65 | ≦4.00 | ≧1.65 | ≧96.0 | ≧5 | ||
| 50H470 | 7.70 | ≦4.70 | ≧1.65 | ≧96.0 | ≧10 | ||
| 50H600 | 7.75 | ≦6.00 | ≧1.66 | ≧96.0 | ≧10 | ||
| HOMECORE | 50H700 | 7.80 | ≦7.00 | ≧1.70 | ≧96.0 | ≧10 | |
| 50H800 | 7.80 | ≦8.00 | ≧1.72 | ≧96.0 | ≧10 | ||
| 50H1000 | 7.85 | ≦10.00 | ≧1.72 | ≧96.0 | ≧10 | ||
| 50H1300 | 7.85 | ≦13.00 | ≧1.72 | ≧96.0 | ≧10 | ||
C:specimens taken transverse to the rolling direction
| Type | Assumed Density (kg/dm3) |
Iron Loss (W/kg) |
Induction (T) |
Lamination Factor (%) |
||
|---|---|---|---|---|---|---|
| Product | Grade | Thickness (mm) |
W15/50 | B50 | ||
| HIEXCORE | 35HX230 | 0.35 | 7.65 | ≦2.30 | ≧1.66 | ≧95.0 |
| 35HX250 | 7.65 | ≦2.50 | ≧1.67 | ≧95.0 | ||
| 35HX300 | 7.70 | ≦3.00 | ≧1.69 | ≧95.0 | ||
| 50HX290 | 0.50 | 7.65 | ≦2.90 | ≧1.67 | ≧96.0 | |
| 50HX350 | 7.70 | ≦3.50 | ≧1.70 | ≧96.0 | ||
| 50HX470 | 7.75 | ≦4.70 | ≧1.72 | ≧96.0 | ||
| 50HX600 | 7.75 | ≦6.00 | ≧1.72 | ≧96.0 | ||
| THINNER GAUGE HIEXCORE |
15HX1000 | 0.15 | 7.60 | ≦10.0 | ≧1.60 | ≧90.0 |
| 20HX1200 | 0.20 | 7.60 | ≦12.0 | ≧1.61 | ≧93.0 | |
| 20HX1300 | 7.65 | ≦13.0 | ≧1.62 | ≧93.0 | ||
| 25HX1250 | 0.25 | 7.60 | ≦12.5 | ≧1.62 | ≧94.0 | |
| 25HX1300 | 7.65 | ≦13.0 | ≧1.62 | ≧94.0 | ||
| 25HX1400 | 7.65 | ≦14.0 | ≧1.62 | ≧94.0 | ||
| 25HX1500 | 7.65 | ≦15.0 | ≧1.64 | ≧94.0 | ||
| 27HX1350 | 0.27 | 7.60 | ≦13.5 | ≧1.62 | ≧94.5 | |
| 27HX1400 | 7.65 | ≦14.0 | ≧1.62 | ≧94.5 | ||
| 27HX1500 | 7.65 | ≦15.0 | ≧1.62 | ≧94.5 | ||
| 27HX1800 | 7.70 | ≦18.0 | ≧1.66 | ≧94.5 | ||
| 30HX1450 | 0.30 | 7.60 | ≦14.5 | ≧1.62 | ≧94.5 | |
| 30HX1500 | 7.65 | ≦15.0 | ≧1.62 | ≧94.5 | ||
| 30HX1600 | 7.65 | ≦16.0 | ≧1.62 | ≧94.5 | ||
| 30HX1800 | 7.65 | ≦18.0 | ≧1.66 | ≧94.5 | ||
| Type | Assumed Density (kg/dm3) |
Iron Loss (W/kg) |
Induction (T) |
Lamination Factor (%) |
Yield Point (N/mm2) |
Tensile Strength (N/mm2) |
||
|---|---|---|---|---|---|---|---|---|
| Product | Grade | Thickness (mm) |
W10/400 | B50 | ||||
| HIGH STRENGTH HIEXCORE |
25HXS1150 | 0.25 | 7.60 | ≦11.5 | ≧1.61 | ≧94.0 | ≧470 | ≧570 |
| 25HXS1200 | 7.65 | ≦12.0 | ≧1.62 | ≧94.0 | ≧460 | ≧560 | ||
Magenetic properties of 25HXS1150 and 25HXS1200 are measured after annealing at 800℃, 2h.
| Type | Assumed Density (kg/dm3) |
Iron Loss (W/kg) |
Induction (T) |
Tensile Strength (N/mm2) |
Lamination Factor (%) |
||
|---|---|---|---|---|---|---|---|
| Product | Grade | Thickness (mm) |
W15/50 | B50 | |||
| HIGH TENSILE STRENGTH HILITECORE |
35HXT590T | 0.35 | 7.65 | ≦10.50 | ≧1.62 | ≧590 | ≧95.0 |
| 35HXT680T | 7.65 | ≦10.50 | ≧1.62 | ≧680 | ≧95.0 | ||
| 35HXT780T | 7.60 | ≦11.00 | ≧1.60 | ≧780 | ≧95.0 | ||
| 50HXT590T | 0.50 | 7.65 | ≦11.50 | ≧1.62 | ≧590 | ≧96.0 | |
| 50HXT780T | 7.60 | ≦12.00 | ≧1.60 | ≧780 | ≧96.0 | ||
MAJOR INTERNATIONALLY-ACCEPTED STANDARDS
| Thickness mm |
NIPPON STEEL W15/50 Max. |
JIS C 2552:2014 W15/50 Max. |
IEC 60404-8-4:2013 W15/50 Max. |
GB/T 2521:2008 W15/50 Max. |
||||
|---|---|---|---|---|---|---|---|---|
| W/kg | W/kg | W/kg | W/kg | |||||
| 0.35 | 35H210 | 2.10 | 35A210 | 2.10 | M210-35A 5 | 2.30 | ||
| 35H230 | 2.30 | 35A230 | 2.30 | M230-35A 5 | 2.30 | 35W230 | 2.30 | |
| M235-35A 5 | 2.35 | |||||||
| 35H250 | 2.50 | 35A250 | 2.50 | M250-35A 5 | 2.50 | 35W250 | 2.50 | |
| 35H270 | 2.70 | 35A270 | 2.70 | M270-35A 5 | 2.70 | 35W270 | 2.70 | |
| 35H300 | 3.00 | 35A300 | 3.00 | M300-35A 5 | 3.00 | 35W300 | 3.00 | |
| M330-35A 5 | 3.30 | 35W330 | 3.30 | |||||
| 35H360 | 3.60 | 35A360 | 3.60 | M360-35A 5 | 3.60 | 35W360 | 3.60 | |
| 35W400 | 4.00 | |||||||
| 35H440 | 4.40 | 35A440 | 4.40 | 35W440 | 4.40 | |||
| 0.50 | 50H230 | 2.30 | 50A230 | 2.30 | M230-50A 5 | 2.30 | 50W230 | 2.30 |
| 50H250 | 2.50 | 50A250 | 2.50 | M250-50A 5 | 2.50 | 50W250 | 2.50 | |
| 50H270 | 2.70 | 50A270 | 2.70 | M270-50A 5 | 2.70 | 50W270 | 2.70 | |
| 50H290 | 2.90 | 50A290 | 2.90 | M290-50A 5 | 2.90 | 50W290 | 2.90 | |
| 50H310 | 3.10 | 50A310 | 3.10 | M310-50A 5 | 3.10 | 50W310 | 3.10 | |
| M330-50A 5 | 3.30 | 50W330 | 3.30 | |||||
| 50H350 | 3.50 | 50A350 | 3.50 | M350-50A 5 | 3.50 | 50W350 | 3.50 | |
| 50H400 | 4.00 | 50A400 | 4.00 | M400-50A 5 | 4.00 | 50W400 | 4.00 | |
| 50H470 | 4.70 | 50A470 | 4.70 | M470-50A 5 | 4.70 | 50W470 | 4.70 | |
| M530-50A 5 | 5.30 | 50W530 | 5.30 | |||||
| 50H600 | 6.00 | 50A600 | 6.00 | M600-50A 5 | 6.00 | 50W600 | 6.00 | |
| 50H700 | 7.00 | 50A700 | 7.00 | M700-50A 5 | 7.00 | 50W700 | 7.00 | |
| 50H800 | 8.00 | 50A800 | 8.00 | M800-50A 5 | 8.00 | 50W800 | 8.00 | |
| M940-50A 5 | 9.40 | |||||||
| 50H1000 | 10.00 | 50A1000 | 10.00 | M1000-50A 5 | 10.00 | 50W1000 | 10.00 | |
| 50H1300 | 13.00 | 50A1300 | 13.00 | 50W1300 | 13.00 | |||
For further product information
Product Quotes, and inquiries without complete information required in inquiry form may not be responded to. Selection of inquiries for reply online is at the sole discretion of NIPPON STEEL. We appreciate your understanding.