Jan. 2005

Contents

• Remarks on Special Issue on Iron & Steel Technology and Nano Technology(33KB)
• Advances in Nano-Level Materials Characterization Technology(851KB)
• Pinpoint Microstructure Characterization Technique by Transmission Electron Microscopy(965KB)
• Development of In situ Microstructure Observation Technique in Steel(778KB)
• Visualization of Nano-precipitate in Low-alloy Steel by Using Energy-filtered Transmission Electron Microscopy(1,019KB)
• Three-dimensional Atom Probe Analysis of Nitriding Steel Containing Cr and Cu(228KB)
• Quantitative Observation of Grain Boundary Carbon Segregation in Bake-hardening Steels(634KB)
• 3DAP Analysis on Solute Segregation of Nb and Mo during Primary Recrystallization of α-Fe(658KB)
• Characterization of Nano-Scale Fine Precipitates in Al-Mg-Si Alloys for Automotive Applications(110KB)
• Microstructural Control of Weld Heat-Affected Zone of Steel by Mn Depletion around Non-metallic Inclusions(1,703KB)
• Application of Controlled Cu Nano-Precipitation for Improvement in Fatigue Properties of Steels(767KB)
• Microstructure Control and Strengthening of High-carbon Steel Wires(398KB)
• Development of High-Strength Steels for Bolts(917KB)
• Alloy Design of Nano-sized Precipitates Bearing High-strength Ferritic Heat-resistant Steels(503KB)
• Influence of Ni and Cu Addition on Galvanizing Properties of Steel Containing Si and Mn -Development of High-strength Steel Sheet for Galvanizing -(1,514KB)
• Nitriding Behavior and Strengthening Mechanism of Ti-added Steels in Rapid Nitriding Process(824KB)
• Nanoscopic Mechanism of Protective Rust Formation on Weathering Steel Surfaces(557KB)
• The 36th Ichimura Prizes in Industry - Contribution Prize (2003) HTUFF®: Super High HAZ Toughness Technology with Fine Microstructure Imparted by Fine Particles(266KB)