- Home >
- Produtcs >
- Infrastructure >
- Construction
NIPPON STEEL Group's products are daily contributing to improvement of the quality of people’s lives.
We are dedicated to using our technology and manufacturing capability to contribute to the solution of infrastructure building.
- NSHYPER BEAM™Beam
-
- NSHYPER BEAM is Rolled H-shapes having large sizes and wider size availabilities. By using it as an alternative for Built-up H-shapes, you can reduce costs and shorten fabrication processes because there is no need of welding.（Maximum size:D:1000mm x W:400mm，Number of sizes:609(S355JR,J0,J2,K2)）
- With the flexibility of it's flange width, NSHYPER BEAM allows you to select an optimum size according to beam design's conditions. In addition, the ratio of the flange thickness to web thickness of NSHYPER BEAM is higher than that of conventional H-shapes, allowing economical design.
- Jumbo Sections(UC356X406 & W14X16)Beam
-
H-shapes used for structural members such as columns and trusses subjected to a high compression force. NIPPON STEEL provides Jumbo Sections with flange thickness of up to 125mm.（Maximum size ; W14X16X730lbs）
- BT-HT series (high-tensile steel plates for building construction)Column
-
The BT-HT series is high-tensile steel for which the yield point does not decrease even for thick products. Most types are manufactured by applying the thermo mechanical control process (TMCP). The high-tensile steel with excellent weldability has been applied to various buildings.
- High HAZ toughness steel (HTUFF™) (for large heat input welding for building construction)Column
-
As the size of buildings increases (higher-rise and larger span), the strength and the cross section of steel materials for steel frames need to be increased. High HAZ toughness steel (HTUFF™) for building construction can be processed by large heat input welding that is required to increase the strength and the cross section. The steel can secure the performance at welds and can improve the welding efficiency at the same time.
- U Column (STKR)Column
-
"U Column" is the product name for our large size square steel pipes (over 200-mm square) conforming to JIS G 3466 Carbon Steel Square and Rectangular Tubes for General Structure (STKR400 and STKR490). The available maximum size is 550-mm square with thickness of 22 mm. They are mainly used as studs of steel-frame buildings as well as for roof trusses, bridges, and construction and industrial machinery.Various major international standards, such as ASTM, CSA, EN, AS are available.
- Square Pipe/Eco-square (STKR)Column
-
Square steel pipes (smaller than 200-mm square) conform to JIS G 3466 Carbon Steel Square and Rectangular Tubes for General Structure (STKR400 and STKR490). They can be used as building components and for frames of construction and industrial machinery and for many other application purposes. In addition to black pipes, colored square pipes for which coating has been applied as primary rustproofing are provided. "Eco-Kaku", square steel pipes with thinner walls compared to those of conventional square pipes are also available.Various major international standards, such as ASTM, CSA, EN, AS are available.
- Steel formwork planeSecondary member
-
Flat formwork is a product used to pour concrete into the floor, in the form of sheets and floors made of steel and iron with a thickness of 2.15mm; 2.3mm; 2.8mm, formwork is manufactured on the principle of bracing with very high strength topology, easy to assemble, finished products after pouring concrete, cheap, high
- Hot Extruded Steel ShapesSecondary member
-
Hot extruded shapes are produced by means of the hot extrusion method. The hot extruded shapes thus obtained are then subjected to tensile straightening and other finishing processes to produce the final product.Accordingly, the hot extrusion process is suitable for producing shapes of complex configuration, multiple-grade / small-lot shapes, and difficult-to-process materials.
- COR-TEN™Surface designed material
-
Weathering Steel COR-TEN™ can overcome atmospheric corrosion by using it to form a protective layer on its surface.
Note: COR-TEN is a registered trademark of United States Steel Corp.
